How Has The Pandemic Impacted Fitness Or Exercise Routine?Hello If You Could Help Me With That One That (2024)

Answer:

I would put one of each stronger people on the different teams and then divide up 1 person to one of the strong people and then 1 person to the other stronger person and then take the last person and make them the ref. They get to tell who is the winner and who is the loser.

Explanation:

Again this is just my opinion.

Answer:I agree with the other person

Explanation:

I agree with the other person

Answer:

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

Explanation:

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):

[tex]T=\frac{1}{f}[/tex]

In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:

[tex]T=\frac{1}{5*10^{10} Hz }[/tex]

Solving:

T= 2*10⁻¹¹ seconds

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

What is fequency?

The fequency is defined as the number of cycles achieved by the any wave it is expressed in hertz.

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):

[tex]T=\dfrac{1}{f}[/tex]

In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:

[tex]T=\dfrac{1}{5\times 10^{10}}=2\times 10^{-11}\ Sec[/tex]

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

Thus a microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

To know more about Frequency follow

https://brainly.com/question/25699025

Answer:

35 N to the right

Explanation:

When calculating net force when both forces are on the same side you add them when they are going against each other you subtract them.

Answer:

2519.63 kg

Explanation:

mass(m)=momentum (p)/velocity

=77000/30.56

=2519.63kg

Answer:

ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.

Explanation:

Materials when heated emit a continuous spectrum with all wavelengths.

Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.

When reviewing the answers, the correct one is:

ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.

Answer:

Amplitude

Explanation:

make sure you give me a brain thing!!!

When a substance is heated the average kinetic energy of molecules increases and they start moving with an increased speed.As a result between mean separation between the molecules also increases

Answer:

kinetic energy

Explanation:

it is most common

Answer:

6.1 * 10^-6

Explanation:

Acellus

Answer: large reflector located in orbit above the Earth's atmosphere

Explanation:

Since the student wants to see the big weather patterns in the upper atmosphere of the planet, and she will therefore need to have excellent resolution, the type of telescope that is ideal for her to use is a large reflector located in orbit above the Earth's atmosphere.

It should be noted that the refractor or a radio telescope isn't ideal in this situation as they will not capture the bug weather pattern and doesn't have an excellent resolution like the large reflector.

Question:-

What process is represented by this redox equation ?

6H 2 O+6CO 2 C 6 H 12 O 6 +6O 2

Answer:-

This equation is of the process of photosynthesis. The proper equation is :-

6CO2+6H2O→C6H12O6+6O2.

Answer:

205N

Explanation:

The net force (F) is the difference between the applied force([tex]F_{A}[/tex]) and the kinetic frictional force([tex]F_{R}[/tex]). i.e

F = [tex]F_{A}[/tex] - [tex]F_{R}[/tex] -----------------(i)

Note that;

[tex]F_{R}[/tex] = μmg

Where;

μ = coefficient of kinetic friction

m = mass of the body

g = acceleration due to gravity = 10m/s²

Equation (i) then becomes;

F = [tex]F_{A}[/tex] - μmg -------------------(ii)

Given from question;

m = mass of motorcycle = 150kg

μ = 0.03

[tex]F_{A}[/tex] = 250N

Substitute these values into equation (ii) as follows;

F = 250 - (0.03 x 150 x 10)

F = 250 - (45)

F = 205N

Therefore, the net force applied to the motorcycle is 205N

Answer:

Bang on a drum.

Explanation:

Amplitude is making loud sounds

Answer:

how tightly strung the wire is

-- Make the string tighter or looser.

-- Keep the same length, but make the string thicker or thinner.

-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.

Answer:

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided. ... Artist's conception of the 6,000-km-plus northward journey of the "India" landmass (Indian Plate) before its collision with Asia (Eurasian Plate).

Explanation:

India has forcefully introduced 40 to 50 million years ago. The landmass of India was once present south of the Equator, but the northern margins began to collide against the Eurasian plate.

Tethys sea was one of the vast oceans, which separated the landmass of India and Asia. Pangaea destruction occurred 200 million years ago, which caused India to forge northward.

Around 80 million years ago, India was approximately 6,400 kilometers south of the Asian continent. The landmass of India when reached the Eurasian plate, it collided because of the same density.

Thus, the plates of Eurasian and Indian landmass collided and caused the forming of hills. The Indian landmass continued to push towards the north, which caused the hills to convert into mountains.

To know more about Indian plate, refer to the following link:

https://brainly.com/question/7669134

Answer:

"332.8 m/s" is the right solution.

Explanation:

The given values are:

Wavelength,

[tex]\lambda=0.65 \ m[/tex]

Frequency,

[tex]f = 512 \ Hz[/tex]

As we know,

⇒ [tex]Speed=Frequency\times Wavelength[/tex]

or,

⇒ [tex]V=f\times \lambda[/tex]

By putting the given values in the above relation, we get

⇒ [tex]=512\times 0.65[/tex]

⇒ [tex]=332.8 \ m/s[/tex]

Answer:

.....................................................................

Answer:

.................................................................

Explanation:

Answer:

3.36 Joules

Explanation:

Work done= Force × distance

F=4.2 N

distance= 0.8 m

work done= 4.2 × 0.8

work done= 3.36 Joules

Explanation:

P= rho×g × h (g=10 m/s²) ,

(rho=1000 kg/m³)

P= 1000×10×5= 50,000 N/m² (C)

Answer:

C.50,000 N/m²

Explanation:

P=rho×g×h

Answer:

2 km/minute

Explanation:

Here, we are asked to calculate the average speed in km/minute.

As we know that,

Average speed = Total distance ÷ Total time taken

Here,

→ Total distance = 10 km + 10 km

Because, he first drove 10 km from his house to Belle Plaine and then he again came back to his house.

→ Total distance = 20 km

→ Total time = 8 minutes + 2 minutes

→ Total time = 10 minutes

Substitute the values in the formula of average speed,

→ Average speed = Total distance ÷ Total time taken

→ Average speed = 20km ÷ 10 minutes

→ Average speed = 2 km per minute

10N =1kg

1000N =?

1000×1/10

100kg

Answer:

Speed-time graph C

Explanation:

The speed of the ball is constant towards surface of Moon since no forces acting.

Speed of ball increases as ball approaches the surface of Earth.

A body's surface gravity is directly proportional to its mass, but inversely related to the square of its radius. Thus, option C is correct.

What is the gravitational field strength on the Earth?

The mass of the Earth's moon is significantly lower than that of the planet. The Moon is not just smaller than Earth, but it is also only around 60% as dense. On the Moon, there is less gravitational field attraction than on Earth, hence a person weighs less there.

The Moon's surface gravity is about 1/6th as powerful as Earth's, or 1.6 meters per second every second. The Moon's surface gravity is lower because it has a smaller mass than Earth.

Due to the absence of forces, the ball is moving toward the surface of the moon at a constant speed.

Therefore, The speed of the ball rises as it gets closer to the Earth's surface.

Learn more about gravitational field here:

https://brainly.com/question/26690770

#SPJ2

Answer:

2.00 (right on acellus)

Explanation:

doubling the distance between two charges makes F (8.00) quarter, so you would just do 8.00*1/4.

6H2O + 6CO2 → C6H12O6 + 6O2

6H2O + 6CO2 → C6H12O6 + 6O2It is photosynthesis.

If the reaction was opposite then it was cellular respiration.

C6H12O6 + 6O2 → 6H2O + 6CO2

Answer:

T = 60°C

Explanation:

We are given;

Mass of water in both cases as 60g.

Thus; m1 = m2 = 60 g

Temperature of first water; T1 = 40°C

Temperature of 2nd water; T2 = 80°C

Let final temperature be T.

To solve for the final temperature, we will use the formula;

(m1 + m2)T = ((m1•T1) + (m2•T2))

(60 + 60)T = ((60 × 40) + (60 × 80))

120T = 7200

T = 7200/120

T = 60°C

Answer:

4cm

Explanation:

If it's a simple ratio 2cm:10N to ?cm:20N, It should be 4cm:20N.